|
 |
*** WARNING ***Never install, operate or make adjustments to Mister Chain Lube while riding, engine is running or while chain is in motion. To avoid oil contamination of tire surface do not leave flow valve on for more than 10 - 15 seconds. Flow valve should be turned to off position after every application. The user assumes all risk when using our products.
SPECIFICATIONS:
|
|
Aluminum reservoir holds approximately 2 oz. of your favorite oil (We like bar and chain lube)
|
|
|
|
Knurled cap for easy on/off
|
|
|
|
Cleanable filter vent
|
|
|
|
Manual on/off flow valve allows for 2 different rates of flow
|
|
|
|
Positional flow line featuring quality Loc-Line. Allows you to position flow line exactly where you want it. Adjustable length for a custom fit.
|
|
|
|
NEW! Aluminum flow line for a more permanent hard wire application.
|
Order now and receive both flow lines to try! Please let us know what works best for you and your make/model.
OPERATION:
|
|
Use hose clamp and rubber pad provided with kit to attach to your frame
|
|
|
|
Position adjustable flow line over chain (adjust length if necessary)
|
|
|
|
Turn manual self indexing flow valve to desired position to regulate flow of oil
|
|
|
|
Push bike for 10 - 15 seconds or manually spin rear wheel (ATV users ride for 10 - 15 seconds)
|
|
|
|
Turn manual on/off flow valve back to closed position to discontinue flow of oil
|
|
|
|
THAT'S IT! YOUR CHAIN IS LUBED AND YOU ARE READY TO GO!
|
|
|
|
Repeat as necessary
|
RETURN POLICY
If you are unhappy with your Mister Chain Lube for any reason return it to:
Mister Chain Lube
359 Webbs Mills Rd.
Raymond, ME 04071
Return within 30 days for a full refund of the purchase price (less shipping & handling charges).
|
|
Product Shots
Hand Held Oiler
The Original: with Loc-Line Adjustable Flow Line
With aluminum tubing
The Story Behind Mister Chain Lube
U.S. Patent No. 6,679,352 B2
Mister Chain Lube was developed and is currently manufactured by a fellow riding enthusiast!
I developed Mister Chain Lube a few years ago for my personal use. In Maine, off road riding dishes out harsh conditions for a chain and sprockets.
The idea came after a 150 mile off road trip. I was never a fan of spray chain lube. Mud and water left my chain bone dry. Having no place to carry chain lube, we would purchase a quart of oil when refueling. The oil would be dumped on the chain to lube it. This was bad for the environment, a mess and a waste of oil and money.
The original prototype was manufactured in my machine shop. Mister Chain Lube became a permanent part of my riding gear and has been tested over 2800 miles on my 2000 Honda 650R.
After several other riders asked me where they could buy one of my chain lube systems, I decided to investigate the possibility of producing and distributing Mister Chain Lube.
There are a couple of other "chain oiling systems" out there on the market. However, these systems may require complicated hookup, maintenance and have potential for operating problems. Mister Chain Lube is easy to install, easy to use and easy to maintain.
Our product is made from quality material right here in the USA and our aluminum reservoir is virtually indestructible.
|
|
|
|